GAS SHIELDED ARC WELDING WIRES

SG1
( ER70S-3 )

Welding of thin walled parts, Root pass welding, For making galvanized coating, TIG welding of tubes and pipe, Shielding gases : TIG ; Ar MAG; 20%CO2 - 80% Ar or pure CO2

SG 70 S-2
( ER70S-2 )

Wire for welding mild and low alloy steels as well as thin walled materials, Being triple deoxidized with Aluminium, Titanium and Zirconium as well as Manganese and Silicon, the wire is capable of producing efficient welds when the steel to be welded is rusty, dirty, undercoa...

SG 2
( ER70S-6 )

Steel construction and machinery production, Welding of ships, boiler tanks, pipe parts, Welding of thin walled steels, Thin sheet welding in automotive industry, Perfect smooth feedability, perfect welding characteristics, Shielding gases: MAG; Ar+CO2 mix gases, TIG; %100 Ar gas...

SG 3
( ER70S-6 )

Used for the same welding purposes as SG2, Its strength is increased by Si-Mn, Low spatter although used under CO2 atmosphere, Excellent wire feeding capability, Shielding gases: MAG; Ar+CO2 mix gases, TIG; %100 Ar gas can be used

SG Mo
( ER80S-Gmod.(ER70S-A1) )

Copper coated wire for GMAW and rod TIG welding in boiler pressure vessel, pipework and crane construction as well as in structural steel engineering, High quality, very tough deposit of high crack resistance and non-aging, Recommended for service in temperature range (-40°C) f...

SG 80 S-D2
( ER80S-D2 )

Copper coated for GMAW and TIG welding in boiler pressure vessel, pipework and crane construction as well as in structural steel engineering, High quality, very tough deposit of high crack resistance and non-aging, Recommended for service in temperatures between of -30°C to +55...

SG CrMo 1
( ER80S-B2 )

Used for the welding of high heat resisting. Cr-Mo alloyed steels which are used for the production of boilers tubes and pipes and nitrided steels, Weld metal is resistant to temperatures up to +570°C, Shielding gases: MAG; Ar+CO2 and Ar+ O2 mix gases, TIG; pure Ar gas can be u...

SG CrMo 1 Si
( ER80S-G )

Used for the welding of high heat resisting. Cr-Mo alloyed steels which are used for the production of boilers tubes and pipes and nitrided steels, Weld metal is resistant to temperatures up to +570°C, Shielding gases: MAG; Ar+CO2 and Ar+O2 mix gases, TIG; pure Ar gas can be us...

SG CrMo 2
( ER90S-B3 )

Used for the welding of high heat resisting, XCr-Mo alloyed steels which are used for the production of boilers tubes,pipes and nitrided steels, Weld metal is resistant to temperatures up to +600°C, Preheat and interpass temperature should be used at 200-300 °C, The test assembly...

SG CrMo 2 Si
( ER90S-G )

Used for the welding of high heat resisting, XCr-Mo alloyed steels which are used for the production of boilers tubes, pipes and nitrided steels, Weld metal is resistant to temperatures up to +600°C, Shielding gases: MAG; Ar+CO2 and Ar+O2 mix gases, TIG; pure Ar gas can be used...

SG CrMo 5
( ER80S-B9/(ER 502) )

Used for the welding of high heat resisting steels, hot hydrogen plants, working temperature is +600°C and also used for the welding of steels with 5 Cr 1/2 Mo, Shielding gases: TIG: pure Ar gas can be used. MAG; Ar+CO2, and Ar+O2 mix gases can be used, The test assembly shal...

SG CrMo 9V
( ER90S-B9 )

Used for TIG welding of high heat resistance steels such as P91 / T91, Power plants, turbines, oil refineries, cool and gasification plants, boiler production, also used for the welding of steels with 9Cr 1Mo, Weld metal is resistant to working temperature up to 600°C, Shieldin...

SG Ni1
( ER80S-Ni1 )

Building up of cranes, transport , industrial facilities, equipment in general, pipelines, shipbuilding, etc, Working temperatures are between of -45°C and +400°C, Shielding gas: Ar+CO2 mix gases can be used for MAG, Shielding gas: Ar gas can be used for TIG

SG Ni2
( ER80S-Ni2 )

Applications down to -60°C on mild steels, low-alloy steels and fine-grained steels, plates, storage tanks, pipelines and equipment for cryogenic use, Shielding gas: Ar+CO2 mix gases can be used, When the one hour holding time has been completed, the assembly shall be allowed t...

SG NiMo1
( ER100S-G )

Fine-grained low alloy steels and also austempering steels for applications. Building up of cranes, transport, tanks, industrial facilities, equipment in general, pipelines, shipbuilding, etc, If necessary, post-weld stress relief shall be heat treated at 560°C-600°C for 1 hour...

ER 100 SG
( ER100S-G )

ER 100 SG is low alloyed and high strength GMAW wire, It is used for joining of the high strength low alloy steels and the fine grained constructional steels, It has high yield strength and impact toughness at low temperatures, Shielding gases MAG: (Ar+% 15-25 CO2) / TIG: Ar

ER 110 SG
( ER110S-G )

ER 11O SG is low alloyed and high strength GMAW wire and GTAW rods, It is used for joining of the high strength low alloy steels and the fine grained constructional steels with minimum yield strength of 690 N/mm², especially Hardox and Weldox sheets, Boilers, pressure vessels,...

ER 120 SG
( ER120S-G )

Fine grained steels, high yield strength, austempering steels excellent properties low temperatures, Lifting and handling machines, bridges, tanks, transport, shipbuilding, railway sector, mines, cranes, frames, etc, Shielding gas: Ar+CO2 mix gases can be used

SG NiCu
( ER80S-G )

Excellent resistance to atmospheric events due to the presence of Cu, Cr, Ni, Suitable for bridges, cranes, ground moving machines, boilers, building structures, petrochemical sector, fans gas pipes, fume section, etc, Shielding gas: Ar+CO2 mix gases can be used, Depending on t...

ELOX SG 307
( ~ER307 )

Filler welding of high-strength low-alloyed and alloyed heat-treatable steels, armor steels, steels including 14% Mn, ferritic chromium steels, heat-resistant steels, non-magnetic steels etc., Joint welding of different types of steels with each other, Filler welding of abrasio...