GAS SHIELDED ARC WELDING WIRES

AlMg 3
( --- )

It is used for joining aluminum alloys includes up to 3 % Mg., Required use of Ar, He or Ar+He gas as shielding gas, It is recommended that preheating to 150°C before welding of plates thicker than 10mm, Resistance to sea water.

AlMg 5
( ER5356 )

It is used for joining aluminum alloys includes over 3 % Mg. Resistance to sea water, Application field is cup and boilers, columns, marine applications, Required use of Ar, He or Ar+He gas as shielding gas, It is recommended that preheating to 150°C before welding of plates thic...

AlMg4.5Mn
( ER5183 )

It is used in welding exposed to sea water aluminum parts,, Used in welding of high strength aluminum alloys operating at low temperatures (-196 ° C), Required used of Ar, He, or Ar+He gas as shielding gas.

AlSi 5 TIG
( ER4043 )

AISi5 is aluminum TIG rod with high content of silicon, It is used for joining and filling of aluminum silicon cast alloys including up to 7% silicon, It is recommended that preheating to 150°C before welding of plates thicker than 15 mm. Shielding gas is Ar for TIG welding, For...

AlSi 12 TIG
( ER4047 )

AISi 12 is aluminum TIG rod with high content of SiIicon, It is used for joining and filling of aluminum silicon cast alloys including more than 7% silicon, It has a good fluidity. Oxyacetylene welding and brazing is possible with GeKaTec F-LH1, It is recommended that preheating...

Al 99.5 TIG
( ~ER1100 )

Al99.5 TIG is pure aluminum weldingTIG rod, It is used for joining of aluminum alloys required high electrical conductivity, It is recommended that preheating to 200°C before welding of plates thicker than 15 mm. Shielding gas: Ar, For gas welding, GeKaTec F-LH1 is recommended.

AlMg 5 TIG
( ER5356 )

AIMg5 is magnesium alloyed aluminum TIG rod, It is used for joining of aluminum alloys required high mechanical properties, The weld deposit has a good resistance to atmospheric influences and sea water, And the weld metal is proper for surface treatment such as anodizing and pol...

AlMg4.5Mn TIG
( ER5183 )

AIMg4.5Mn is Magnesium alloyed Aluminum TIG rod, It is used for joining of Aluminum alloys including more than 3% Mg, The weld deposit has a good resistance to atmospheric influences and sea water, It is recommended that preheating to 150 °C before welding of plates thicker than...

R1
( ERCuSi-A )

It is Copper-Silicon alloyed MIG welding wire and used in welding of galvanized steels, Shielding Gas: Ar, Silicon-Bronze (copper-silicon) MIG welding wire.

R1 L
( ERCu )

It is Cu-Sn alloy welding wire, It is used in welding of pure copper and copper based low alloy, tank and boilers, graphite electrode holders, slag baths, oxygen tubes, electrical equipment, Shielding Gas: Ar, He, Ar+He

R1 AG
( --- )

Applicability in arc welding of copper materials with high electric conductivity, of copper- silver alloys containing low amounts of phosphor as well as of pure copper, Additional applicability in gas welding of deoxidized copper, High electric conductivity (30-45 S.m/mm2), Use o...

R4
( --- )

It is Cu-Sn alloy welding wire, It is used in welding of pure copper and copper based low alloy, tank and boilers, graphite electrode holders, slag baths, oxygen tubes, electrical equipment, Shielding Gas: Ar, Ar+He

R4 L
( ~ERCuSn-A )

It is Cu-Sn alloy welding wire, Joining and surfacing of tin bronzes, cast tin bronzes, such as CuSn 2, CuSn 6, CuSn 8 and CuSn 6 Zn, Shielding Gas: Ar, Ar+He

R4 A
( ERCuAl-A2 )

It is Cu- AI MIG welding wire, It is used for welding of sea water vaporizers, door accessories, rolling equipment, CuAI 5, CuAI 8, G-CuAI 8 Mn

R4 AL
( CuAl-A1 )

It is Cu-AI MIG welding wire, It is used for surfacing of steel and cast steels, It is used for joining and surfacing of Aluminum Bronzes, e.g. (CuAl5), (CuAl8), G-CuAI 8 Mn, Cu Al 5 As, C Zn 20 Al 2, surfacing of Copper, Brass, non alloyed and low alloyed steels, Shielding Gas:...

R4 M
( ERCuMnNiAl )

Mn-Ni, Aluminium Brange is MIG welding wire, Used for welding of screw, clutch pulley and compression plates, Shielding gas : Ar ( %99.99)

CuNi SG
( ERCuNi )

It is used of Copper alloys includes up to 30% Nickel, joining and surfacing of steel alloys., Joining of stainless steel to copper alloys is possible, Because of excellent resistance to sea water corrosion, it is used marine off-shore applications, sea water exchangers and food...

CuNiFe SG
( --- )

It is used for copper nickel alloys with 10% nickel such as CuNi5Fe, CuNi10Fe., Weld deposit is highly corrosion resistant, It is used for joining and surfacing copper-nickel alloys and CuNiFe pipes which pertorm in corrosive areas such as seawater, Shielding Gas: Ar

308 L Si MIG
( ER308LSi )

• Cr-Ni alaşımlı östenitik paslanmaz grubundaki çeliklerin, 304 ya da stabilize edilmiş 347 ve benzer kalite çeliklerin kullanıldığı ilaç, selüloz, kağıt ve gıda endüstrisinde kullanılır, • Kaynak metali -196 °C’a kadar sünektir, +400° C’a kadar da taneler arası korozyona dayanık...

309 L Si MIG
( ER309LSi )

Ostenitik paslanmaz çeliklerin kaynağında, farklı metallerin birleştirilmesinde, tampon tabakalarda, korozyona dayanıklı paslanmaz çeliklerin birleştirilmesinde ve de bunların düşük alaşımlı çeliklerle birleştirilmesinde ve kaplı çeliklerin kaynağında kullanılır., Koruyucu gaz ol...